The CU 125 system is a mechanical cam-driven tool changer combining an intermittent series of linear
and rotary movements which perform the tool change:
A mechanical tool safety lock on the gripper holder arm guarantees safe tool transfer during changeover.
The CU 180 system is a mechanical cam-driven tool
changer combining an intermittent series of linear
and rotary movements which perform the tool
change
A mechanical tool safety lock on the gripper holder arm guarantees safe tool transfer during changeover.
Type of tool handled = SK 100/ISO50
Tool change arm with center distance 700 mm
Cycle time of 2.3 seconds
Capacity to handle qty (2) 20 Kg (66 lbs) tools
the unit is driven by a reduction gear with Servomotor
The CU 220 system is a
mechanical cam-driven tool
changer combining an intermittent
series of linear and
rotary movements which
perform the tool change:
Type of tool handled = SK 100/ISO50
Tool change arm with center distance 900 mm
Cycle time of 2.3 seconds
the unit is driven by a reduction gear with Servomotor
Modular linear tool magazine, pitch distance pallet to pallet of 105 mm, with HSK063 tool holder, complete with tool extraction station
operated by a pneumatic cylinder, stroke of105 mm.
Servo motor design storage/retrieval tool magazine for fast tool changeover
The MUL 105 magazine is available custom-sized, starting from 20 tool holders and increasing the size by modules of 10 tool holders each for larger capacity.
