Gate TI Indexing and Transfer

(973) 300-0090

(973) 300-0061

To view Catalogs and Technical Guide in PDF, you will need Adobe Acrobat Reader. It is free at:
 
 

HomeSynchronous Motion Machine Chassis SystemsRotary Chassis Sub-systems

 

Rotary Chassis Sub-systems


Rotary Indexing Table Chassis Synchronous Motion Machine Chassis Systems

Gate TI Rotary Assembly Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Gate TI 21491 Chassis pics

Gate TI Rotary assembly chassis 21579 BRZ 05

Gate TI rotary chassis 21579 BRZ 02

Gate TI Rotary Chassis line shaft transmission 21559_04

Gate TI Rotary Index Chassis 21566_BRZL_08

Oscillating dial chassis Gate TI

Rotary chassis Gate TI 048

Rotary Chassis DT double dials gaa05845_imm1

Rotary Chassis DT double dials underside gaa05845_imm2

Rotary Chassis Indexer 1X157 06

Rotary chassis Indexer w base 1X157 12

Rotary Chassis with part handlers 21566_BRZL_02

Assembly Cell

Gate TI Rotary Assembly Chassis Rotary Chassis Rotary Chassis Rotary Chassis Rotary Chassis Gate TI 21491 Chassis pics

(Gate TI Rotary Assembly Chassis shown)

Gate TI offers a unique technical resource for assisting automation and assembly machine builders who have a need for synchronized mechanical motion. We work with the machine builder to determine the optimal machine design and station layout based on your requirements, we provide full engineering support and develop a complete timing chart and acceptance model or drawing. A major benefit of using a synchronized chassis subsystem is that once everything is timed together (synchronized)  it is fixed and does not need to be adjusted.  Also if a variable frequency drive is utilized, then only one control is needed for several different stations.

All of our chassis systems are designed for each individual drive to be coupled to a single piece line shaft for simple and depending performance in the field.

Using a rotary indexing drive at the heart of the machine we can provide a machine chassis sub system from 6 stations to 30 stations with a dial diameter ranging from 24”  to 60”. Both linear and rotary pick and place units can be used to provide up to 180° of rotary oscillation and 5.9” of vertical stroke, or 7.4” linear transfer and 5.9” of vertical stroke for your pick and place requirements. Pressing operations or vertical movements can also be provided, with strokes up to approximately 12” and press forces in excess of 2000 lbs all mechanically synchronized to a central line shaft.

Typical chassis cycle rates are from 20 cycles per minute up to 90 cycles per minute, however by integrating more than one part / tooling per station,  production rates of up to 360 per minute can be achieved

 

Photos

Gate TI Rotary Assembly Chassis

Gate TI Rotary Assembly Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Rotary Chassis

Gate TI 21491 Chassis pics

Gate TI 21491 Chassis pics

Gate TI Rotary assembly chassis 21579 BRZ 05

Gate TI Rotary assembly chassis 21579 BRZ 05

Gate TI rotary chassis 21579 BRZ 02

Gate TI rotary chassis 21579 BRZ 02

Gate TI Rotary Chassis line shaft transmission 21559_04

Gate TI Rotary Chassis line shaft transmission 21559_04

Gate TI Rotary Index Chassis 21566_BRZL_08

Gate TI Rotary Index Chassis 21566_BRZL_08

Oscillating dial chassis Gate TI

Oscillating dial chassis Gate TI

Rotary chassis Gate TI 048

Rotary chassis Gate TI 048

Rotary Chassis DT double dials gaa05845_imm1

Rotary Chassis DT double dials gaa05845_imm1

Rotary Chassis DT double dials underside gaa05845_imm2

Rotary Chassis DT double dials underside gaa05845_imm2

Rotary Chassis Indexer 1X157 06

Rotary Chassis Indexer 1X157 06

Rotary chassis Indexer w base 1X157 12

Rotary chassis Indexer w base 1X157 12

Rotary Chassis with part handlers 21566_BRZL_02

Rotary Chassis with part handlers 21566_BRZL_02

Assembly Cell

Assembly Cell

Rotary Chassis

Rotary Chassis

Videos

Downloads

PDF Catalogs Gate TI Company Capabilities Brochure



Tel: 973.300.0090  |  Fax: 973.300.0061  |  E-mail: info@gateti.com

Gate TI has sales support offices throughout the world including main facilities in Italy, Germany, India, and France enabling support for our customers.

CATALOGS & TECHNICAL GUIDES

CLICK HERE TO DOWNLOAD
OUR PRODUCT CATALOGS

To view Catalogs and Technical guides in PDF,
you will need Adobe Acrobat Reader.