| Benefits of CDS Part Elevators: |
| • |
Available in sizes: 17.5, 7.0, 4.4, or 2.2 cu ft. hopper capacity. |
| • |
All stainless steel (304) hopper, channel, chute, and elevator sides which are ideal for Medical
& Pharmaceutical parts |
| • |
Ergonomic hopper designed for floor level loading and Operator's safety |
| • |
Rounded edges and corners eliminate sharp edges which can injure operators and create fiber
contamination. Sanitary Seamless welds all around. |
| • |
Caster wheels on base allow easy transport of elevator to work stations or thru standard size doorways |
| • |
Hopper clean out doors on bottom front and back for quick product changeovers |
| • |
Clear polycarbonate hinged doors on both hopper and elevator channel. |
| • |
FDA approved PVC cleated elevating belt. |
| • |
Elevator belt does not trap parts. |
| • |
Variable speed AC motor drive in 120 VAC single phase or 230 VAC three phase. |
| • |
Motor located below product hopper. |
|
|
| CDS Part Elevators are provided with the following Standard Equipment: |
| • |
Stainless steel hopper with clear polycarbonate hinged door cover. |
| • |
Safety proximity sensor to stop conveyor when the hopper door is open. |
| • |
Quick-change part clean out panel below hopper on front side for easy operator access. |
| • |
Stainless steel channel for part loading, provided with hinged clear polycarbonate door cover
and part clean out panel on rear side below hopper. |
| • |
Scratch resistant steel support frame, painted gray, with locking caster wheels. |
|
|
| Other Optional Equipment: |
| • |
Safety proximity switch on elevator channel door cover. |
| • |
Fiber optic sensor to detect low part levels. |
| • |
Gas strut opener for hopper door |
| • |
Safety proximity switch on the rear clean out panel |
| • |
Pneumatic Flow Diverter on output |
| • |
Dual Discharge Chutes on output |
| • |
Extra capacity hoppers |
| • |
Standoff legs on base for increased discharge height |
| • |
Extra tall models for overhead part feeding. |
