Gate TI Indexing and Transfer

 

HomePick & Place

 

Pick & Place

Parts Handlers with flip heads

MHP - Rotary part handlers with special flip heads for rotating parts through 90 degrees.

Gate TI Rotary Part handler 90 deg oscillating motion 2-2010 062

Gate TI rotary part handler with 90 degree oscillation motion

Gate TI Linear Series Part handler PNP 2-2010 063

Gate TI Linear Part handler for pick and place operation on synchronous assembly chassis, feeding 240 part per minute - 4 parts per cycle at 60 cycles per minute

180 Degree Oscillating Part Handler

Gate TI 180 deg oscillating Part Handler

Cam Driven Systems IT50 Pneumaticam

Cam Driven Systems IT50 Pneumaticam - Lift and Rotate Parts Handler

IP Gantry System

Over Head Gantry style part handler driven by 2 different IP drives.

LHP 60 Linear Part Handler Cycle D

Linear part handler / pick and place unit. Demonstrating Cycle "D" from our catalog. Sim to a Raking motion

LHP 60 Linear Part Handler - Cycle B

Linear part handler / pick and place unit. Demonstrating Cycle "B" from our catalog.

2 LHP Part Handler Units Timed Together

LHP units timed together to form a small machine cell, the bottom unit is performing a simple "translator" box motion whilst the top unit is an inverted U Pick & Place motion. Both units are mounted to a Gate TI tubular steel machine base painted to the customers color spec.

MHP60 Rotary Part Handler - Cycle D

Rotary Part handler / pick and place unit. Demonstrating Cycle "D" from our catalog.

MHP60 - Rotary Part Handler - Cycle C

Rotary Part handler / pick and place unit. Demonstrating Cycle "C" from our catalog.

MHP60 Rotary Part Handler - Cycle B

Rotary Part handler / pick and place unit. Demonstrating Cycle "B" from our catalog.

MHP60 Part Handler - Cycle A

Rotary Part handler / pick and place unit. Demonstrating Cycle "A" from our catalog.

3D Simulation Part Handler & Index Drives

MHP Rotary Part Handler timed with 2 HP drives pulling a chain conveyor. The conveyors pause for a short time to allow the MHP to pick the parts from the tooling.

3d Simulation of 2 LHP Part Handlers Timed Together

LHP Part handlers timed together on a common line shaft with a single motor driving both units. Cycle rate of finished machine was over 60 cycles per minute.




Tel: 973.300.0090  |  Fax: 973.300.0061  |  E-mail: info@gateti.com

Gate TI has sales support offices throughout the world including main facilities in Italy, Germany, India, and France enabling support for our customers.

CATALOGS & TECHNICAL GUIDES

CLICK HERE TO DOWNLOAD
OUR PRODUCT CATALOGS

To view Catalogs and Technical guides in PDF,
you will need Adobe Acrobat Reader.